Releases
Note: Apple silicon (M1 and up) requires 20.4.2.
Although all previous releases are available here, not all are supported. Any version of Hedge that is older than 1 year is unsupported and considered legacy. Chances are that a legacy version will work completely fine, but if you do run into trouble, please consider upgrading your license.
macOS
Windows
- Official support for macOS 14 Sonoma!
- The blue “updates available” ribbon now disappears after 1 minute (Thanks for requesting, all).
- It's now possible to disable the ProGrade integration, to get around a remounting issue when using non-ProGrade cards in ProGrade readers.
- Hedge 23.1 drops support for macOS 10.14 or older, so make sure you are on MacOS 10.15 or newer.
- Broken media detection; Hedge will show a warning when zero-byte media files are detected on the Source.
December 14, 2022 － This update is all about speed; whether you're using regular hard drives, NVMe, 10GE, or doing many-to-many backups — enjoy between 20% and 250% speed gains! Learn more...
macOS
Windows
- New Queuing mode: Single Destination. First, offload to your fastest drive to get editing, and then to the slower destinations.
- The Finder Extension now works on macOS 11.
- Hedge no longer shows a "Does not fit" alert when a Destination fills up with purgeable space, as Hedge can now transfer into that space.
- Hedge's copy engines got a massive tune-up.
- Start a transfer directly from Finder, with the new Finder integration.
- Archive mode is no longer throttled by MD5's lack of speed.
- Extra checksum generation can now be enabled for all copy modes.
- C4 checksums are now supported too.
- Transfer Logs now show the checksum and verification status of each file.
- Fix for a crash reported by Jon, Hendrik, Wes, Nick, and Hans 🙏
- Added support for Codex Device Manager 6.2
- New Queuing mode: Single Destination. First, offload to your fastest drive to get editing, and then to the slower destinations.
- Organizing transfers with the
{File Hour}element? Hedge now uses 24h notation.
- Hedge's copy engines got a massive tune-up.
- Start a transfer directly from Explorer, with the new Explorer integration.
- Archive mode is no longer throttled by MD5's lack of speed.
- Extra checksum generation can now be enabled for all copy modes.
- C4 checksums are now supported too.
- Transfer Logs now show the checksum and verification status of each file.
April 13, 2022 － Automatically add metadata to all your iconik assets. Generate sidecars containing all your custom elements, to be processed automatically by iconik’s Storage Gateway app. Learn more...
macOS
Windows
- Broken media detection; Hedge will show a warning when zero-byte media files are detected on the Source (You can all thank Judy for the idea!).
- macOS Ventura has an issue setting timestamps on exFAT drives, so we made a workaround for that. (Thanks for reporting, Ben).
- Want to run a script immediately when Hedge starts? Now you can, with the new Hedge Started event.
- Official support for macOS 13 Ventura!
- Fix for a rare case where preset values would be cleared after a transfer.
- Custom date elements (available in Hedge Pro) now automatically use the system settings if no value is provided.
- With this release, we're bringing back a much-requested workflow: Batch Sources. You can now start transferring multiple sources in one go, all using the same preset — with just one click 🚀
- Hedge now polls for changes like updated system time regularly.
- Clip Review (a Hedge Pro feature) was not showing any stills, that's fixed.
- Fixed an edge-case that caused Hedge to crash when adding Transfers (Thanks for sending in those crash reports, all!).
- Added support for Codex Device Manager 6.1
- MHL Awareness for ASC MHL: if a source contains ASC MHLs, those checksums are used by Checkpoint rather than regenerating them from the source.
- ASC MHL history is now fully supported.
- For some users, the Hedge app icon had a bit of an identity crisis, appearing to be a folder. No longer, thanks to Andy and others.
- New integration: iconik.
- The Hedge API no longer uses a token, as it's now tied to Pro licenses. This also applies to Hedge Helper which uses the API. Reach out if you need access.
- Enhance your workflow by automatically launching scripts based on events like added disks and completed transfers.
- Thanks to Michal, Hedge now warns when files on the source are no longer present at transfer time.
- Fixed a script error that popped up when running Hedge as a non-admin user (Thanks for reporting, David).
- Fixed some edge cases that caused Hedge to crash (Thanks for sending in those reports, all).
- It's now possible to hide disks from the Disk overview (Thanks for requesting this feature, all).
- Local Transfer Logs are now saved into day folders.
- Adding Labels for source collections works again (Thanks for reporting, Zac).
- Hedge could crash when dealing with presets and also when ejecting disks; that's fixed (Thanks for sending in those crash reports Vebjørn, and all others).
- MHL Awareness for ASC MHL: if a source contains ASC MHLs, those checksums are used by Checkpoint rather than regenerating them from the source.
- ASC MHL history is now fully supported.
- Elements would sometimes not make it to iconik sidecar files (Thanks for reporting, Mitchell)
- Elements could end up twice in iconik sidecar files, that's fixed.
- New integration: iconik.
- The Hedge API no longer uses a token, as it's now tied to Pro licenses.
Feb 1, 2022 － You can now organize your offloads using custom metadata elements (i.e Location, Project, etc.). Just pop in a source, review, and transfer ✨ Learn more...
macOS
Windows
- The "Preparing..." state, which handles indexing, MHL awareness, and duplicate detection is now much, much faster and less RAM hungry when a Source contains large MHLs and Checkpoint is enabled.
- Clearing Elements is now also possible to do from the Review pane when not using presets.
- With Auto Labels, the Source Name element would not always refresh properly.
- The Review pane now shows more elements without having to scroll.
- The Counter would sometimes refuse to increment, that's fixed.
- Some pop-ups were hard to read in light mode, that's fixed too.
- Clearing Elements is now also possible to do from the Review pane when not using presets.
- Fixes an issue where the Source Name element didn't update when not using a preset.
- Some users reported Hedge crashing when using File Date elements, that's fixed!
Nov 2, 2021 — Our Codex copy engine gains support for Codex Device Manager 6.0. Built in tight collaboration with Codex to get the most out of your mags.
July 27, 2021 — Automatically add your media to SCRATCH projects, add metadata, and get your dailies going faster than ever.
May 12, 2021 － Create Labels automatically, with smart counters, and new timestamps that understand that tomorrow doesn't start at midnight.
Dec 16, 2020 － Automatically sort your files into folders based on properties like creation date and file type, plus a lot more to help refine what is copied, and how: truly unique file names, ignore bundles, and a "copy only..." filter.
Sep 15, 2020 － Managing a lot of media? Many different settings? Speed up your workflow with Presets. Create one for each job, production, or even a camera - and switch between 'm with one click.
May 19, 2020 (win Oct 13, 2020) － Create not just Backups but Archives too, with the new Checkpoint source integrity options — Complete with auto-enable, transfer sync, legacy checksums, early warning radar, and of course MHL awareness.
Mar 6, 2020 － An all-new Connect to connect all your Hedge installations and get a live overview of your transfers on both iOS and Android
Aug 15, 2019 － A copy engine tailor-made for Codex media, including support for High Density Encoding. Built in tight collaboration with Codex to get the most out of your mags. Hedge 19.4 requires at least macOS 10.12.
Releases older than 19.4.8 are no longer available, as the license provider we previously used has gone offline.
Jul 23, 2019 － Start organizing like a pro: rename your media, skip unwanted files — all during a transfer.
Apr 25, 2019 － With the new Frame.io integration, use your watch folders directly within Hedge and benefit from Frame.io's accellerated upload.
Feb 19, 2019 － Sometimes, you need that camera card back as soon as possible. Queuing controls if sources are copied one by one, simultaneously, or even to just one destination at a time.
Jul 12, 2018 － Whereas backups are meant to be redundant, sources are not... heat, dust, even a wonky cable can alter what is being read. Detect problematic media and peripherals, with 18.3.
Apr 4, 2018 － Save time, copy only what's new. Incremental backups are here! Copy into existing folders, and skip what's already there and identical. Perfect if you continue shooting on a card, without erasing it.
Feb 22, 2018 － Car Wash is not so much a new feature as it is a workflow. It allows for a flexible setup of Sources and Destinations. You can now set any combination of drives, any time. Just reset, set, and go.
New integration; Foolcat generates clean camera reports with thumbnails and extended metadata in HTML and PDF format.
Dec 7, 2017 － New integration; Parashoot. Hedge can tell Parashoot when a Source is ready to be 'erased' and ejected. Parashoot will then ask for your confirmation. Enabling this integration disables Auto-Eject.
Nov 24, 2017 － Sometimes, instead of offloading a whole disk, you only need to transfer a single clip, or a few folders. With Collections, Hedge can now transfer whatever you need: single or multiple files, multiple folders, and of course combinations
Hedge for Windows is here!
Jun 27, 2017
Apr 5, 2017
Feb 2, 2017
Nov 15, 2016
Sep 7, 2016
May 24, 2016
Apr 26, 2016
Apr 8, 2016
Mar 19, 2016
Last modified 3d ago